 |
 |
This product was designed to optimize heat dissipation
for excellent cooling performance. |
|
 |
Dual heatpipes increase heat transfer speed and enhance
the cooling efficiency. |
|
 |
The fanless design ensures complete noiselessness and
maintenance-free operation. |
|
 |
RAM heatsinks for cooling the VGA RAM. |
|
 |
Compatibility with virtually all types of VGA cards
allows reinstallation when upgrading the VGA card. (Incompatible
with VGA cards that do not have original heatsink holes
measuring 3mm in diameter, or VGA cards on which the ZM80D-HP
interferes with the card¡¯s components.) |
|
 |
An Optional Fan (ZM-OP1, sold separately) can be attached
to the heatsink directly without using a separate bracket. |
|
|
|
|   |
 |
Weight : 350g |
Heat Dissipation Surface Area : 1350§² |
Heatpipe : Gold plated copper tube |
VGA RAM Heatsink material : Anodized Aluminum |
Dissipation material : Anodized Aluminum |
VGA RAM Heatsink weight :    |
|   |
Frontside : 2.9 g (EA), Backside
: 1.2 g (EA) |
|
|
|   |
 |
This
product can be used with any video cards that have heatsink
mounting holes. |
|
| Note
1) |
If you are using an nVIDIA GeForce Fx5800, an ATI Radeon
9800 Pro, a Matrox Parhelia, or a more advanced model,
an Optional Fan (ZM-OP1, sold separately) must be installed.
|
|
| Note 2) |
This product cannot be installed on nVIDIA
GeForce 6800 GT and 6800 Ultra because
they do not have 3mm heatsink installation holes. Also,
this product cannot be installed on nVIDIA
GeForce 6600 GT AGP, 6600 AGP, and PCx 5*** series
products. |
|
| Note 3) |
Zalman does not recommend VGA card overclocking. Zalman
is not responsible for any damage from VGA card overclocking.
|
|
| Note 4) |
Since this product weighs 350g, always firmly fasten
the VGA card onto the case with a screw. Special care
should be taken while the computer is being moved. Zalman
is not responsible for any damage arising while moving
the computer. |
|
| Note 5) |
To enhance the performance of this product, the use
of a fan on the rear panel of the system¡¯s case is recommended.
|
|
| Note 6) |
After installing this product on a VGA card (Video Graphics
Card), the PCI slot adjacent to the AGP slot will be unusable.
|
|
|
|
|   |
 |
 |
The computer should be placed
according to the following diagrams in order for the product
to function properly. |
|
|   |
If it is set up in such a way that the video card's GPU faces
upwards, then this product cannot be used. Also, if you attempt
to adjust the positioning of the computer by flipping it in
a reverse direction, the product will not function properly
either, so you should place your computer case in its normal
position. |
|   |
  |
|   |
 |
|
|
| 1) Good |
| (AGP slot is under the
CPU) |
| 2) Good |
| (AGP slot is under the
CPU) |
| 3) Bad |
| (AGP
slot is over the CPU) |
| 4) Good |
| (AGP slot is on the
right side of the CPU) |
|
|
|
|   |
  |
 |
To Enhance the Performance |
|
|
|   |
 |
You can expect a satisfactory cooling performance with
ZM80D-HP alone, but this product is also designed to accommodate
a noiseless fan (ZM-OP1) on its heatsink.
Therefore, should you want even more stable performance,
you can attach the noiseless fan (ZM-OP1) as needed.
|
|   |
  |
 |
When installing a video card that has this product installed
into a computer system, open up the PCI slot cover under
the AGP slot to lower the GPU(VPU) temperature by around
4 to 5 degrees Celsius. |
|
|
|
|   |
 |
 |
Video Cards with the Heatsink
Mounting Holes |
|
|   |
 |
Installable on video cards with the heatsink mounting
holes |
|
|   |
  |
 |
Interference with the Motherboard
Components and Other Peripherals |
|
|   |
 |
If the northbridge heatsink that is 25mm or taller in
height (measured from the motherboard's surface) is away
from the AGP slot in the direction of the CPU by 5.5mm
or farther, this product can be installed. |
|   |
  |
 |
If CNPS7000 (Zalman's noiseless CPU cooler) is also
to be installed, the CPU retention guide needs to be 35mm
or farther away from the AGP slot for this product to
be installable. |
|
|
|
|   |
 |
 |
- Frontside Heatsink 1EA
- Backside Heatsink 1EA
- Heatpipe Cover 1EA
- Frontside Heatsink Base 1 Set
- Backside Heatsink Base 1 Set
- VGA RAM Heatsinks 1 Set
- Heatpipe A 1EA
- Heatpipe B 1EA
- Screw Driver 1EA
- Assembly Parts 1 Set
- Spare Parts 1Set
Optional Components :
ZM-OP1 (ZM80D-HP Optional Fan)
ZM-RHS1 (VGA RAM Heatsinks), Thermal Tape |
|
|
|
|   |
 |
| Zalman affixes a Computer Noise Prevention System (CNPS) mark to all components
used for noiseless computers. |
|   |
 |
 |
The specifications of any product may change without prior notice
to improve the performance thereof. |
|