 |
 |
Zalman¡¯s innovative dimple-type processing technology
allows lightness in weight and excellent cooling performance. |
|
 |
Pure aluminum-base material water bock provides excellent
heat transfer, and anodized base prevents corrosion. |
|
 |
High performance thermal pads with excellent elasticity
provide great adhesion to all heat-generating components.
|
|
 |
The optimized design allows easy installation and direct
cooling of RAM, FET, and I/O chipset. |
|
| *
|
Notice
This CPU water block is a component for water cooling
systems for CPUs and cannot be used independently. It
must be used with a water cooling system such as ZALMAN's
RESERATOR 1 Plus/ RESERATOR 1 V2/RESERATOR 2/ RESERATOR
XT Water Cooling System. |
|
|
|
|   |
 |
|
| Dimensions |
93(W) x 183(L) x 31(H) mm |
| Weight |
420g |
| Base Material |
1) Water Block Cover / Base : Pure Aluminum
2) Fitting : Brass |
| Compatible Tubes (Outer x Inner) |
13 x 9mm, 12 x 8mm, 11 x 8mm, 10 x 8mm |
|
|   |
 |
 |
- VGA Water Block Assembly
- Nine (9) Nipples
- Nine (9) Nuts
- Two (2) PVC Washer Plates
- Ten (10) Springs
- Ten (10) O-rings
- Two (2) Tube Clamps
- Thermal Grease
- Thermal Pads    One (1) 14 x 14 x 1T
(for I/O Chipset Contact)    Four (4) 7
x 23 x 1T (for FET Contact)    Three (3)
16 x 70 x 1T (for RAM Contact)
- User¡¯s Manual |
|
|
|
|   |
 |
| Zalman affixes a Computer Noise Prevention System (CNPS) mark to all components
used for noiseless computers. |
|   |
 |
 |
Test the product for leakage away from the system before installing
it on the system. Once no leakage is confirmed, proceed with the installation
and use. |
|
 |
Used approved coolant for computer water-cooling to prevent corrosion.
|
|
 |
Use coolant tubes listed under the compatibility list. |
|
 |
Do not install the product if it interferes with any VGA components. |
|
 |
Design of this product does not allow product disassembly. Do not
disassemble the product. |
|