Socket CPU CPU Compatibility Compatible Motherboard

Intel 1156(1) Core i7 Supports all speeds - Core i5 Core i3 775 Core 2 Quad Supports all speeds Core 2 Duo Pentium Dual Core Pentium D Pentium 4 Celeron D AMD 754 Sempron Supports all speeds Athlon 64 939 Athlon 64 Supports all speeds Athlon 64 X2 Athlon 64 FX Opteron Dual-Core Opteron 940 Athlon 64 FX Supports all speeds Opteron Dual-Core Opteron

Note(1) To use the CNPS7700 series coolers on socket 1156, ZM-CS5B must be purchased separately.

Dimensions 136(L) x 136(W) x 67(H) mm Weight 600g Base Material Pure Copper & Pure Aluminum Dissipation Area 3,268㎠ Thermal Resistance 0.19 ~ 0.28 °C/W

Bearing Type 2 Ball-Bearing Speed 1,000 ~ 2,000rpm ± 10 % Noise Level 22.7 ~ 37.1dBA ± 10%

Dimensions : 70(L) x 26(W) x 26(H) mm Weight : 20g Output Voltage : 5V ~ 11V ± 2% Allowable Power : 6W or lower Connector : 3-Pin

Pure Copper and Pure Aluminum base material ensures excellent heat dissipation. Compatible with all single and dual core CPUs for Intel Socket 1156/775 and AMD Sockets 754/939/940. The large 120mm fan inside the FHS maximizes cooling performance by providing sufficient airflow even at low fan speed. The large 120mm fan provides air flow over a large area, cooling not only the CPU, but the VGA card, Northbridge, FET, and RAM as well. The high intensity red LEDs will operate with sufficient brightness even in low operating oltage. The adjustable fan speed controller (FAM MATE 2) enables control of noise and fan performance.

Common Components - Cooler (CNPS7700-AlCu LED) - Thermal Grease - FAN MATE 2 - FAN MATE 2 Cable - Double-Sided Tape - User’s Manual   Intel Components - Clip Support - S-Type Grips - Clip Support Fixing Bolts - Washers - Nuts   AMD Components - AMD Backplate - L-Type Grips - Backplate Fixing Bolts - Washer Plate

Zalman affixes a Computer Noise Prevention System (CNPS) mark to all components used for noiseless computers.

Korean Patent Application No. 389257 Korean Design Application No. 327440-3 Patent applications pending in over 20 nations around the world including USA, EU, and Japan.

The maximum weight for a cooler is specified as 450g for Intel Socket 1156/775 and AMD Socket 754/939/940. Special care should be taken when moving a computer equipped with a cooler which exceeds the relevant weight limit. Zalman Tech is not responsible for any damage that occurs when moving a computer. The cooler fan operates at 2,300rpm if connected directly to the motherboard’s power connector without the use of FAN MATE 2. When booting the computer, it may automatically power down after an alarm sound by a system monitoring program to indicate that the CPU fan is rotating slowly. If this happens, turn the speed control knob fully clockwise to increase the fan speed. Then set ‘CPU Fan Detected’ to ‘Disabled’ in BIOS settings, or set the slowest rotational speed of the CPU fan in the system monitoring program to less than or equal to 900rpm. The fan should be set to Normal Mode if Overclocking. (Zalman Tech Co., Ltd. is not responsible for any damage resulting from CPU Overclocking.)