Socket CPU Silent Mode (1,350~1,800rpm) Low-noise Mode (1,800~2,600rpm) Compatible Motherboard

Intel 478 Celeron Supports all speeds Supports all speeds Celeron D Pentium 4 Willamette Northwood Prescott - 775(1) Celeron D - Supports all speeds - Pentium 4 Prescott - Up to 540&650 Cedar Mill Pentium D - - Core 2 Duo Supports all speeds Supports all speeds AMD 754 Sempron Supports all speeds Supports all speeds Athlon 64 939 Athlon 64 Supports all speeds Supports all speeds Athlon 64 X2 Athlon 64 FX Opteron Dual-Core Opteron 940 Athlon 64 FX Supports all speeds Supports all speeds Opteron Dual-Core Opteron

Note(1) To use the CNPS7000 Series coolers on socket 775, ZM-CS1 (Socket 775 Clip Support for CNPS7000 Series) must be purchased separately.

Dimensions 109(L) x 109(W) x 62(H) mm Weight 773g Base Material Pure Copper Dissipation Area 3,170㎠ Thermal Resistance 0.27 ~ 0.20 °C/W

Bearing Type 2 Ball-Bearing Speed 1,350 ~ 2,600rpm ± 10 % Noise Level 18.0 ~ 27.5dBA ± 10%

Dimensions : 70(L) x 26(W) x 26(H) mm Weight : 20g Output Voltage : 5V ~ 11V ± 2% Allowable Power : 6W or lower Connector : 3-Pin

Does not generate noise or vibration in Silent Mode. Pure Copper base material ensures excellent heat dissipation. Intel Pentium 4 (Socket 478) and AMD Sempron/AMD64 (Socket 754/939/940) compatible design for broad compatibility. (To use this product on socket 775, ZM-CS1 must be purchased separately.) 92mm fan inside the FHS maximizes airflow and makes installation easier. Adjustable fan speed controller (FAN MATE 2) enables control of noise and fan performance.

Common Components - Heatsink Assembly (CNPS7000-Cu) - Four Bolts - Thermal Grease - Fan Speed Controller (FAN MATE 2) - Double-sided Tape (for installing FAN MATE 2) - Cable for FAN MATE 2 - User's Manual - in English and Korean Components for Intel Pentium 4 (Socket 478) - Two Clip Supports for Socket 478       Components for AMD Sempron/AMD64   (Socket 754/939/940) - Two Nipples

Zalman affixes a Computer Noise Prevention System (CNPS) mark to all components used for noiseless computers.

Korean Patent Application No. 00-54635 Korean Design Application Nos. 02-17470, 02-25208, 02- 25208, etc. Patent applications pending in over 20 nations around the world including USA, EU, and Japan.

Fan should be set to Normal Mode if OVERCLOCKING. Zalman Tech Co., Ltd. is not responsible for any damage resulting from CPU OVERCLOCKING. The maximum weight for a cooler is specified as 450g for Intel Socket 478/775 and AMD Socket 754/939/940. Special care should be taken when moving a computer equipped with a cooler which exceeds the relevant weight limit. Zalman Tech is not responsible for any damage that occurs when moving a computer.