Dimensions 480(L) x 220(W) x 450(H) mm Weight 15kg (33lb) Material Aluminum Alloy Motherboard Compatibility Standard ATX / micro ATX PSU Compatibility Standard ATX / ATX12V PCI/AGP Card Compatibility Full Size Drive Bays 3.5" Bay x 5, 5.25" Bay x 4 Front I/O Port USB Port x 2, IEEE1394(Firewire) Port x 1 Headphones x 1, MIC x 1

Dimensions 125(L) x 172(W) x 26(H) mm Weight 800g Material Aluminum Alloy, Acrylic Coolant Capacity Max. 300cc

Power Consumption 6W, DC 12V Maximum Flow Rate 300l/hr Maximum Lift 1.8m

Dimensions 220(L) x 220(W) x 30(H) mm Bearing Type 2 Ball - Bearing Fan Speed (Min ~ Max) 550rpm ± 10% ~ 850rpm ± 10%

Dimensions 53(W) x 63(L) x 40(H) mm Weight 154g Material Pure Copper (Base), Pure Aluminum (Cover)

Material Propylene Glycol & Anti-Corrosion Agent Volume 250cc Freezing Point -9 ℃ Replacement Cycle 1 Year

① Fan Speed Gauge - Display the 120mm Rear Fan’s rotation speed in real-time.   ② FND (Flexible Numeric Display) - Temperature Display: Coolant Temperature (upper display), Ambient Temperature (lower display) - Coolant Level Sensing - If the coolant level drops below a threshold level, an alarm will sound and the display will flicker. Please refill with - coolant, if the display flickers. - Coolant Temperature Sensing - If the coolant’s temperature reaches above 60°C(92 ), an alarm will sound and the FND Display will flicker. If the flickering - is observed, please check for problems.   ③ Coolant Flow Rate Gauge - Displays the coolant’s flow rate in real time.   ④ Control Knob - Controls the Fan Speed and Coolant Flow Rate.   ⑤ °C/℉(Temperature Mode) Button - Sets the temperature display to Celsius(°C) or Fahrenheit(℉).   ⑥ AUTO/MANUAL Button - AUTO Mode: Automat fan speed and coolant flow rate. - MANUAL Mode: Allows the user to manually adjust fan speed and coolant flow rate.   ⑦ LED/RESET Button - LED On/Off: A short press turn the displays’ LED’s On & Off. - RESET: A long press for at least 5 seconds resets the cooling system.

Check that the product is placed properly. Confirm that the coolant circulation path is correct as shown below.

- Enclosure - CPU Water Block (ZM-WB5) - Jump Cable - Anti-Corrosion Coolant (ZM-G300) - Funnel - Silicone Tube (1m) - 220mm LED Fan - 220mm LED Fan Grill - User’s Manual

Zalman affixes a Computer Noise Prevention System (CNPS) mark to all components used for noiseless computers.

Do not mix any contaminants with the coolant when filling. It may cause product failure or corrosion. Check the manual when connecting cables. Incorrect connections can lead to fire resulting from short circuiting. Check for leaks on the Water Blocks and Tubes before installation. Preparing the necessary tools (Needle-Nose Pliers, Scissors) will ease the installation process. Check to see if the DC cables are properly connected before use. If the coolant is not circulating properly or if the pump’s flow rate becomes too low for other reasons, the red LED will begin to flicker with an alarm sound. Immediately turn the system OFF and contact the place of purchase. Must use the provided coolant. Regularly check the amount of coolant and replenish as needed (replacement cycle of the ZM-G300 coolant is 1 year). If a leak is found, turn off the system immediately and contact the place of purchase. Do not block the Air Ducts on either side of the product. This can lead to fan failure, increased noise, or a decrease in product performance. Make sure that the Water Pump is functioning properly.

Innovative liquid cooling integrated Extreme Hybrid Enclosure

Integrated design for easy setup of a liquid cooled system

5mm sturdy aluminum panels prevent chassis vibration

Hinged side panels for convenient component installation and maintenance

Tool-free HDD installation bays

Comprehensive monitoring & display system   Automatic/manual control of cooling performance and noise

CPU Water Block (ZM-WB5 Plus) Pure copper-base material water block provides excellent heat transfer, and anodized water block cover prevents corrosion. Connection fitting for the hose is a single-body cover in the form of two connection structure types, which allows for various types of hoses to be used.   Anti-Corrosion Coolant (ZM-G300) This coolant contains a high quality anti-corrosion agent for various materials including copper, aluminum, plastic, and other metals that prevents corrosion for long term operation.

VGA Water Block (Optional) The VGA Water Block incorporates a light weight pure aluminum base for high cooling performance, and is anodized and coated to prevent corrosion. It also incorporates pivoting fittings for easy installation of hoses. ZM-GWB3850/3870 & ZM-GWB8800GT/GTS (G92)  ZM-GWB8800 Ultra & GTX/GTS  ZM-GWB3    Northbridge Water Block (ZM-NWB1, Optional) This anodized, pure aluminum block is built for high performance cooling, and is designed for compatibility with a wide variety of Northbridge chipsets.